Konica Minolta Magicolor 5440 DL - Manual (Page 71)

Other Main Unit Field Service
2-34
II Main
tena
nce
4.4.8 Control Panel (PWB-OP)
1. Remove the Upper Front Cover.
☞ 2-30
2.
Remove the Left Cover.
☞ 2-31
3.
Remove the Rear Cover.
☞ 2-31
4.
Remove the Exit Tray.
☞ 2-32
5.
Remove two screws [1] and the Con-
trol Panel [2].
6. Disconnect the connector.
4.4.9 Hard Disk Unit (HDD) (magicolor 5450 only)
1. Remove the Rear Cover.
☞ 2-31
2.
Remove seven screws [1] and the
Print Control Board protective shield
[2].
3. Remove the HDD unit.
4. Remove the connector [1] of the
HDD unit.
[1]
[1] [2]
4138fs2011c1
4138fs2534c0
[1]
[1]
[1]
[2]
[1]
4138F2E012DA
5450_E.book_PDF.book 34 ページ ２００５年４月１２日 火曜日 午後１２時５４分