5 auto continue, 6 hold job timeout, 7 energy saver – Konica Minolta Magicolor 5440 DL User Manual

Page 172: Auto continue -69, Hold job timeout -69, Energy saver -69

Advertising
background image

Main Unit Field Service

Menu (magicolor 5450)

3-69

III

Ad

just

men

t/Set

ting

7.7.5

AUTO CONTINUE

7.7.6

HOLD JOB TIMEOUT

7.7.7

ENERGY SAVER

Function

• At the time of the following Operator Call, continues auto printing by ignoring the

media type or size.

• “PAPER EMPTY” (except “MANUAL FEED”), “xxxx SIZE ERROR”, “xxxx TYPE

ERROR”.

Use

To specify whether printing should continue when the specified media size and type are
not available.

Setting
/procedure

ON: Auto continuous printing is ON.
OFF: Auto continuous printing is OFF.

1. Select “AUTO CONTINUE” and press the MENU/SELECT key.
2. Select “Desired setting” and press the MENU/SELECT key.

• The default setting is “ON.”

ON

OFF

Function

• Sets the amount of time before a job saved temporarily in the printer is automatically

deleted.

Use

• To change the amount of time a job is held before being deleted.

Setting
/procedure

1. Select “HOLD JOB TIMEOUT” and press the MENU/SELECT key.
2. Select “Desired auto delete time” with the Up key

U/Down keyV and press the

MENU/SELECT key.

• The default setting is “DISABLE.” (No auto delete.)

DISABLE

1 hour

4 hours

1 day

1 week

NOTE
• This menu is available only when an optional Hard Disk unit is installed.

Function

• Sets whether the printer should go into Energy Saver mode when not printing or pro-

cessing a print job and when the Control Panel is not being used. To set the amount
of time before Energy Saver mode is activated, use the “ENERGY SAVER TIME”
menu.

• Energy Saver mode is automatically canceled when any of the following operations is

performed:

The machine is restarted.
A print job is received.
Any of the keys on the Control Panel is pressed.
The Front Door or Right Door is opened and closed.

Use

To specify whether Energy Saver mode is to be used.

Setting
/procedure

1. Select “ENERGY SAVER” and press the MENU/SELECT key.
2. Select “Desired setting” and press the MENU/SELECT key.

• The default setting is “ON.”

ON

OFF

5450_E.book_PDF.book 69 ページ 2005年4月12日 火曜日 午後12時54分

Advertising