Konica Minolta PageScope - Manual (Page 23)

4 Changing the Device Setup
18
4.3.2 Selecting the Mode
Use the procedures in this section to select the server you want to
configure as the print server, or the NDS context.
If you are using bindery service (NetWare 3.x):
1.
Put a check mark into the NetWare 3.x Bindery Server check
box.
2. Click the button to display the Mode Select dialog box, which
shows a list of servers on the NetWare network.
3. Select the server you want to configure as the print server, and then
click the
OK button.
4. When everything is the way you want, click the Next button.
If you are using NDS (NetWare 4.x or
lator):
1. Put a check mark into the NetWare 4.x NDS Context check box.
2. Click the button to display the Mode Select dialog box, which
shows a list of NDS trees on the NetWare network.
3. Select the NDS tree you want to setup as the print server, and then
click the
OK button.