Konica Minolta PageScope - Manual (Page 36)

5 Peer-to-peer Print Setup
31
5. Click the Add Port button. Check the details of the setup in the
dialog box that appears.
6. If everything is the way you want, click the OK button.
7. When the Success dialog box appears, click OK .
The P2P Setup dialog box appears. See 5.3 After Creating the
Peer-to-peer Port.
5.3 After Creating the Peer-to-peer Port
You can use the dialog box below to associate the port you created with
a printer.
You can select the following items.
• Add new printer:
Select this option when you want to allocate a new printer to a
port you created in 5.1 or 5.2.
• Change the port of the existing printer:
Select this option when you want to change the port for an
existing printer to a port you created in 5.1 or 5.2.