Konica Minolta PageScope - Manual (Page 38)

6 Option Setup
33
6 Option Setup
Use the Option dialog box to configure PageScope Network Setup
options.
The following are the settings that can be configured when changing
the option setup.
• Protocol (See 6.1 Selecting a Protocol)
• Search Range (See 6.2 Specifying the Search Range)
• Navigation mode browser (See 6.3 Specifying BOOTP)
• BOOTP Setting (See 6.3 Specifying BOOTP)
6.1 Selecting a Protocol
Perform the steps below to select the protocol for use with PageScope
Network Setup. The functions available with PageScope Network
Setup depend on the protocol that is currently selected.
1.
Select Option on the Setup menu to display the Option dialog box.
2. Click the Select Protocol tab.