Konica Minolta PageScope - Manual (Page 34)

5 Peer-to-peer Print Setup
29
2. Select the IPX Connection option under Device List to display a
list of network devices for which ports can be created.
To refresh the information in the
Device List , click the button
under the list.
3. In the Device List , select the device you want to configure. If the
device you want to configure is not in the list, specify it manually.
See 5.2.2 Configuring for IPX Peer-to-peer Printing by Specifying
the Device Manually.
4. Click the Add Port button. Check the details of the setup in the
dialog box that appears.
5. If everything is the way you want, click the OK button.
6. When the Success dialog box appears, click OK .
The P2P Setup dialog box appears. See 5.3 After Creating the
Peer-to-peer Port.