Konica Minolta PageScope - Manual (Page 33)

5 Peer-to-peer Print Setup
28
5. Type the port number for TCP/IP peer-to-peer printing into the
Port Number box.
6. Click the Add Port button. Check the details of the setup in the
dialog box that appears.
7. If everything is the way you want, click the OK button.
8. When the Success dialog box appears, click OK .
The P2P Setup dialog box appears. See 5.3 After Creating the
Peer-to-peer Port.
5.2 IPX Peer-to-peer Printing
5.2.1 Configuring IPX Peer-to-peer Printing
Perform the following steps to configure for IPX peer-to-peer printing.
1.
Select P2P Setup on the Setup menu to display the P2P Setup
dialog box.
You could also click the toolbar
button.