Fast forwarding/rewinding or skipping tape, When the key is pressed during stop, When the key is pressed during play – Kenwood NV 600 User Manual

Page 25: Caution for cassette tape ejection, Remote control operation, Selecting dolby nr, Selecting the reverse mode, Let's put out some sound, 1 press the input key to select the tape input, 2 press 6 (band) key

Advertising
background image

25

Basic section

CURSOR

SET

6

BAND

TV

VIDEO1
VIDEO2

CD

TUNER

TAPE

FUNCTION

Fast forwarding/rewinding or skipping tape

By leaving non-recorded blanks of 4 seconds or
more between each piece of music, desired piece of
music can be selected by skipping others (up to 16
in each of the backward and forward directions).

To rewind tape or skip
music in direction

|

To fast forward tape or
skip music in direction

\

When the key is pressed during stop

÷ Fast forwarding or rewinding starts.

÷ Press the stop key (7) to stop fast forwarding or rewinding.

When the key is pressed during play

÷ Skipping of music starts.

Caution for cassette tape ejection

÷ Do not attempt to eject the cassette tape until the

tape has been stopped completely by pressing the
stop (

7) key. Opening the cassette holder while the

mechanism is running may lead to malfunction.
Should it become impossible to close the cassette
holder, turn power off then on again.

1 Press the INPUT key to select the TAPE input.

1 VIDEO1
2 VIDEO2
3 CD
4 TUNER
5 TAPE

2 Press 6(BAND) key.

Remote control operation...

Displayed when Dolby NR is selected

Reverse mode indicator

tape transport
direction indicator

When the remote control unit is attached
to the main unit: Tape counter
When it is detached from the main unit:
"Stop" for stop, "Play" for playback.

Selecting Dolby NR

Using the Dolby NR in recording allows you to
reduce tape hiss noise. Be sure to set "Dolby NR"
on when playing back a tape recorded with Dolby
NR.

1 Select "TAPE" with the CURSOR key.

2 Display the "TAPE" menu.

3 Select the "Dolby NR" setting mode.

4 Select "On" or "Off" and press the SET

key.

Selecting the reverse mode

The reverse mode determines the mode of auto-
matic reversal of tape at the end of each side.

1 Select "TAPE" with the CURSOR key.

2 Display the "TAPE" menu.

3 Select the "Direction" setting mode.

4 Select one of the following reverse

modes and press the SET key.

1

”: Playback stops after having

played one side of tape.

2

”: Playback stops after having

played both sides of tape in a

deck.

3

”: Endless playback of both

sides of tape.

Let's put out some sound

¢

4

–P.CALL–

INPUT

CURSOR

SET

SET

CURSOR

SET

CURSOR

SET

CURSOR

SET

SET

CURSOR

SET

Advertising
This manual is related to the following products: