Kenwood NV 600 - Manual (Page 46)

46
Application section
¢ 4
–P.CALL–
SET
¢ 4
–P.CALL–
SET
¢ 4
–P.CALL–
SET
7
Select a preset radio station.
(This step is required only
when the tuner input is
selected in the above.)
8
Select the message to be
displayed, "AI-Play" or
“Normal-Play”.
9
Press the ENTER key to
complete the setting.
0
After completing the set-
ting, set the power OFF.
Sleep Timer (Sleep)
1
Display the "Function" menu.
2
Select the message to be
displayed, "Sleep On” or
"Sleep OFF”.
3
Set the time period until
the power is to be turned
OFF.
÷ The time period can be set in 10-minute steps from
"Off" up to "90" minutes.
÷ Selecting "Off" cancels the sleep timer setting.
÷ The back light of the remote control unit turns off
while the sleep timer is active.
÷ The power will turn off when the set time period
has elapsed.
÷ When the timer has been set and power set to OFF,
the STANDBY/TIMER indicator lights up in amber.
ENTER
CURSOR
SET
CURSOR
SET
Timer operation