Kenwood NV 600 - Manual (Page 26)

26
Basic section
INPUT
¶REC
CURSOR
DIRECTION
SET
PUSH OPEN
DIRECTION
Recording on TAPE
Note that this cassette deck cannot record onto
Metal tapes.
Note Note Note
Let's recording
1. Load a cassette tape.
1 Open the cassette holder.
2 Insert a tape and close the
cassette holder
÷ Be sure to remove tape slack.
÷ Be sure to close the cassette holder completely.
÷ The normal (TYPE I) or High (TYPE II) tape types are detected and set auto-
matically.
÷ Use a cassette tape with which the protect tab for accidental erasure pre-
vention is not broken. T
TUNER (Broadcasts)
VIDEO1
VIDEO2
2. Select the source to be recorded.
To record sound from a CD, use the dedicated
recording function by referring to "CD synchro-
nized recording" (
¶) or "Convenient record-
ing methods" ( fl).
The present procedure described the most
general recording method
3. Select the tape transport direction.
÷ When recording is started, the tape is transported in the direction selected in this
step.
÷ Wind the tape to the position where recording is to be started.
To reverse the tape transport direction
1 Select "TAPE" with the CURSOR key.
2 Press the SET key.
3 Press the DIRECTION key to switch the
tape transport direction.
1 2
3
INPUT
CURSOR
SET