Kenwood NV 600 - Manual (Page 31)

31
Application section
Receive an RDS station.
2
¢ 4
–P.CALL–
Select a station where “RDS” and “EON” are lit. “RDS” and “EON” are Lit
Wait for the desired information.
3
CD or TAPE playback may also be started.
As long as the unit is ON, the unit is always ready
for the reception.
÷ When one of the stations of the network of the station
received in 2 starts broadcasting the program contents
selected in
1, that station will be received automatically.
At this time, Tape playback will stop and CD playback will
pause. However, external equipment (VIDEO1/VIDEO2)
will remain as it is.
In case of waiting for information with an
RDS station without EON function
When there is no “EON” display with the op-
erations of steps
2 and 3 and the desired infor-
mation is selected in advance, waiting for the
desired information will be done only with the
presently received RDS station.
In regard to TP (Traffic Program) indicator
When the “TP” indicator is lit, this indicates that
the station or another station in the same net-
work is broadcasting traffic information. Even
without an EON reservation, traffic information
can be heard from the station when “TP” indi-
cator is lit for the presently received station.
R.D.S. (Radio Data System)
÷ When the unit is OFF or during recording, the EON
function does not operate.
÷ When the transmission of the selected program con-
tents ends in case of automatic reception with the EON
function, return will be made to the status directly before
operation of the EON function. When CD or TAPE play-
back has been interrupted, it will be continued from the
point of interruption.
Each press of the stop ( 7) key switches the PS
and PTY display alternately.