Display the "function" menu, Select the type of the com- ponent (vcr, dvd, etc), Select the manufacturer – Kenwood NV 600 User Manual
Page 51: Select the type of the remote control codes, Check the remote control operations
51
Application section
Registering the component connected to the
rear-panel Video1 or Video2 input
1
Display the "Function" menu.
2
Select the message to be
displayed, "Video1" or
"Video2".
3
Select the type of the com-
ponent (VCR, DVD, etc).
4
Select the manufacturer.
5
Select the type of the
remote control codes.
6
Check the remote control
operations.
7
If the operations are nor-
mal, press the ENTER key
to set it.
÷ Press the SET key and ensure that the component
is turned ON.
÷ If normal operation cannot be performed, place the
cursor on "Back" and re-select the code type. Be
sure to check the results later.
÷ The cable tuner and DSS operations are not avail-
able in other areas than the U.S.A. and Canada.
÷ The displayed information is variable depending on
areas.
The manufacturer list is displayed.
CURSOR
SET
SET
ENTER
CURSOR
SET
CURSOR
SET
CURSOR
SET
CURSOR
SET
Remote control of external components