Playback of cd, Listening in the desired sequence, Program playback) – Kenwood NV 600 User Manual
Page 32: Program desired tracks, Select the cd input, Display the "cd" menu, Select the "set, Select a track number and press the set key, For each track, Press the enter key to quit programming
32
Application section
ENTER
CURSOR
INPUT
ENTER
SET
6
TV
VIDEO1
VIDEO2
CD
TUNER
TAPE
FUNCTION
Playback of CD
Listening in the desired sequence
(program playback)
Use the following procedure to program desired
tracks in a desired order. (up to 32 tracks)
Program desired tracks.
(In stop mode only)
1
1
Select the CD input.
2
Display the "CD" menu.
3
Select the message to be
displayed, "Program On"
or "Program Off".
4
Select the "Set".
5
Select a track number
and press the SET key.
6
To program other tracks,
repeat step
5
for each
track.
7
Press the ENTER key to
quit programming.
÷ When "Clear" is selected, the program being dis-
played will be cleared.
÷ Up to 32 tracks can be programmed. When "Pro-
gram Full" is displayed, no more track can be pro-
grammed.
÷ If you make a mistake in the middle, press the
HOME key to return to the basic screen.
INPUT
SET
CURSOR
SET
CURSOR
SET
CURSOR
SET