Play the programmed tracks, Select the cd input, Display the "cd" menu – Kenwood NV 600 User Manual
Page 33: Select the message to be displayed, "program on, Select the "check, Press the enter key to quit program checking, Checking the program, Clearing the program (in stop mode only), Select the "off
33
Application section
Play the programmed tracks.
6
BAND
¢
4
–P.CALL–
1
Select the CD input.
2
Display the "CD" menu.
3
Select the message to be
displayed, "Program On".
4
Select the "Check".
5
Display a program number
and check the track pro-
grammed under it.
6
Press the ENTER key to
quit program checking.
2
÷ Pressing the 4 or ¢ key during playback skips
to one of the tracks programmed before or after
the current track.
÷ Pressing the 4 key once during playback returns
to the beginning of the current track.
Checking the program
(In stop mode only)
Use the following procedure to check the pro-
grammed tracks.
Clearing the program (In stop mode only)
Use the following procedure to clear all the pro-
grammed tracks from the program.
1
Select the CD input.
2
Display the "CD" menu.
3
Select the message to be
displayed, "Program On".
4
Select the "Off".
Playback of CD
ENTER
INPUT
SET
CURSOR
SET
CURSOR
SET
INPUT
SET
CURSOR
SET
CURSOR
SET