Kenwood NV 600 - Manual (Page 14)

14
Preparation section
CLOCK
/LIGHT
SET
¢ 4
–P.CALL–
SET
CLOCK
4, ¢
SET
STANDBY/TIMER
CLOCK
/LIGHT
Clock adjustment
Adjust the clock before setting the timer.
After plugging the AC cord into a power
outlet, set the time of the day as described
below.
ON/STANDBY
1. Switch power ON.
If a CD or cassette has been loaded in the unit, simply pressing the play
key turns power ON and starts playback automatically.
To stop the playback, press the
7 key.
2. Display the Clock display.
3. Display the Clock Adjust
screen.
The displayed time of the day blinks
when the clock has not been adjusted.
4. Adjust the time.
5. Set the time.
After setting the correct time of the day, press the SET key.
To display the time Press the CLOCK/LIGHT key. The LCD display shows
the time for abut 5 seconds then returns to the previ-
ous display.
÷ In other areas than the UK, Europe and
Australia, the clock shows the time of
the day in the 12-hour system.
÷ The previous display will reappear if no
operation is performed for about 5
seconds.