Cd program recording), Display the "function" menu, Select the message to be displayed, "cd – Kenwood NV 600 User Manual
Page 39: Tape rec, Select the "program rec, Program cd tracks, Start recording, Preparation
39
Application section
CURSOR
ENTER
SET
1
Display the "Function" menu.
2
Select the message to be
displayed, "CD
→
Tape
Rec".
3
Select the "Program Rec".
4
Program CD tracks.
5
Start recording
Recording desired CD tracks in a desired order onto tape
(CD program recording)
The desired tracks in a CD can be programmed in
a desired order and recorded.
Convenient Recording Methods
Number of programmed CD tracks,
total play time of the program
÷ This function is available only when the CD
player is in stop mode.
Follow
5 to 7 in step 1 on
page 32.
CURSOR
SET
CURSOR
SET
CURSOR
SET
ENTER
To stop operation in the middle
Press the HOME key to abort and cancel the
operation and return to the basic screen.
Preparation
÷ Perform step 3 ( "Select the tape transport direc-
tion") on page 26.
÷ Perform steps 2 to 4 of "Selecting the reverse
mode" on page 25.