Konica Minolta Copier 2223 - Manual (Page 115)

Glossary G-5
Glossary
MANUAL DUPLEX manual two-sided copying, performed using the bypass.
MEASURING GUIDE the ruled guide plate along the left edge of the
platen glass used for determining the correct placement of originals.
MESSAGE AREA a display on the control panel which indicates machine
status, copying operations and instructions for clearing mishandled paper.
MISHANDLED PAPER non-exited original/copy paper which must be
cleared before copying can be resumed.
MISHANDLED PAPER CODES J Codes which flash on the control panel
to indicate the source of user-clearable mishandled paper.
MIXED SIZE ORIGINAL COPYING the ability to copy originals of two
different sizes using the RADF/ADF without first having to sort the
originals.
MULTI-SHEET BYPASS a 50-sheet tray which bypasses the main paper
feed system.
NON-SORT MODE a mode which allows copies to exit to the exit tray or
top bin of the sorter without being sorted or grouped.
OHP abbreviation for overhead projection transparency film.
OHP INTERLEAVE a mode which copies and inserts an OHP
transparency sheet along with each regular copied sheet.
ORIENTATION long-edge or short-edge placement of original on the
RADF/ADF or platen glass to match the copy paper feeding direction.
ORIGINAL a document which is placed on the platen glass or document
feeder for copying.
[P] CODES codes that indicate improper machine conditions which are
user-correctable, e.g., the copier front door is open.
[P] KEY a special key on keypad which accesses programming functions,
copy count, PM count, and frame/fold erasure amounts.