Konica Minolta Copier 2223 - Manual (Page 65)

6-8 Duplex Copying
Duplex Copying
Manual Duplex (continued)
2-Sided to 2-Sided Using the Bypass
ORIGINAL PLACEMENT: Face down, same as copy paper feeding direction
COPY PAPER: 8.5”x11” 20 lb bond; using bypass, feed sheets one at a time
MAXIMUM STACK QUANTITY: 20 sheets (20 lb)
DUPLEX FEEDING DIRECTION: railing edge of first copy is leading edge in bypass
AMBIENT TEMPERATURE AND HUMIDITY: 77°F (25°C); 50% RH
1 Raise document cover and
place side 1 original face down
on platen glass or RADF/ADF.
2 Close document cover.
3 Press
START PRINT to copy
side 1.
4 Immediately insert the copy into
the bypass tray face down
without changing direction of
page heading, i.e., the trailing
edge at exit becomes the
leading edge into the bypass.
5 Turn original over and place
side 2 face down. Close cover.
6 Press COPY SIZE to select
SPECIAL .
7 Press START PRINT .
Repeat the procedure until
duplexing is completed for all
originals.
NOTE: When making multiple 2-sided copies of the same original it is possible to
stack up to 20 single-sided copies in the bypass in order to copy the second side.