Konica Minolta Copier 2223 - Manual (Page 121)

S-2 Specifications
Specifications
Specifications Subject To Change Without Notice
Name Konica 2223
Configuration Desktop
Platen Stationary
Development Dry 2-component magnetic brush
Photoreceptor OPC drum
Toner Black
Waste Toner Toner recycling system
Auto Shutoff 30/60/90/120 minutes, set by service (default setting is 60 min.)
Auto Reset None or 2 minutes, set by service
Warm Up Approximately 65 seconds at 68°F (20°C) with 50% RH
Operating Environment 50°~86°F (10°~30°C); 10~80% RH recommended
First Copy Out Time 5.5 seconds, 8.5”x11” Manual/AES
Continuous Copy 1~99
Copying Speed 23cpm: 8.5”x11”; 17cpm: 8.5”x11”R
15cpm: 8.5”x14”; 12cpm: 11”x17”
Platen Original Sheet/Book; 11”x17” (280mm x 432mm) maximum
Book Weight: 15 lbs (6.8kg)
Book Thickness: 1.6” (40mm)
Registration: Center line
Leading edge: Left side
Copy Paper Size: 11”x17”, 8.5”x14”, 8.5”x11”, 8.5”x11”R, 5.5”x8.5”
Weight: 16~24 lb bond with tray;
In bypass: 16~32 lb plain paper and special stock:
OHP film, labels, 3-hole punch, rag content
(feed special stock one sheet at a time)
Copy Paper Sources 2 tray ports (250 sheets; service-adjustable)
Bypass: 50-sheet (16~24 lb);
user-adjustable, 11”x17”~5.5”x8.5”
Optional tray: 250 sheets (20 lb bond)
Drawer Base (DB-307): 1 x 1,000 sheets; (20 lb bond)
1 x 250 sheets; (20 lb bond)
Drawer Base (DB-607): 1 x 1,000 sheets; (20 lb bond)
1 x 250 sheets; (20 lb bond)
Paper: As recommended by Konica
APS Automatic Paper Selection (scanning)
AES Automatic Exposure Selection
Copy Density Automatic (AES), plus manual density (7 levels)