Konica Minolta Copier 2223 - Manual (Page 117)

Glossary G-7
Glossary
PREVENTIVE MAINTENANCE (PM) periodic preventive maintenance
service performed by a Konica service representative.
PRINT QUANTITY the number of copies selected for a job using the
numeric keypad.
RADF a reversing automatic document feeder which automatically feeds
originals directly to the platen glass for copying, and reverses originals
during 2
s 2 or 2 s 1 copying modes.
RATIO WINDOW a small window on the control panel which displays the
magnification ratio currently in use.
RECALL KEY [0] a key that can be pressed while copying is in progress
to display the print quantity selected for the job.
REDUCE & SHIFT a mode that preforms an automatic image reduction
with Image Shift, when the binding margin (Shift) alone is likely to cause
image loss.
REVERSING AUTOMATIC DOCUMENT FEEDER (RADF) a reversing
automatic document feeder which automatically feeds originals directly to
the platen glass for copying, and reverses originals during 2
s 2 or 2 s 1
copying modes.
SERVICE CODES F Codes which indicate machine conditions requiring
the attention of a Konica service representative.
SHIFT a mode that allows the user to create a fixed binding margin on the
copy.
SIMPLEX one-sided.
SITE REQUIREMENTS the recommended space requirement for the
copier and its installed accessories.
SORT a sorter mode that collates a full set of originals in separate bins.