Konica Minolta Copier 2223 - Manual (Page 64)

Duplex Copying 6-7
Duplex Copying
Manual Duplex
1-Sided to 2-Sided Using the Bypass
ORIGINAL PLACEMENT: Face down, same as copy paper feeding direction
COPY PAPER: 8.5”x11” 20 lb bond; using bypass, feed sheets one at a time
MAXIMUM STACK QUANTITY: 20 sheets (20 lb)
DUPLEX FEEDING DIRECTION: Trailing edge of first copy is leading edge in bypass
AMBIENT TEMPERATURE AND HUMIDITY: 77°F (25°C); 50% RH
1 Arrange one-sided originals in
sequence and place page 1
face down on plate glass or
face down on RADF/ADF.
2 Close document cover.
3 Press
START PRINT to copy side 1.
NOTE: When making multiple 2-sided copies of the same original it is possible to
stack up to 20 single-sided copies in the bypass in order to copy the second side.
4 Immediately insert copy into the
bypass tray face down without
changing direction of page
heading, i.e., the trailing edge at
exit becomes the leading edge
into the bypass.
5 Remove first original, and place
page 2 on platen glass. Close
cover.
6 Press COPY SIZE to select
SPECIAL .
7 Press START PRINT .
Repeat the procedure until
duplex copying is completed for
all originals.