Konica Minolta Copier 2223 - Manual (Page 28)

Copier Information 3-7
Copier Information
Control Panel (continued)
22 MESSAGE AREA displays information on copier status and instructions for
use.
23 COPY DENSITY INDICATORS light the density level selected.
24 COPY DENSITY manually overrides AES in seven levels, from normal to
lighter or darker.
25 COPY SIZE INDICATORS light to indicate the copy size selected.
26 COPY SIZE overrides APS for manual copy size selection.
27 AUTO INDICATORS light when the AUTO button is pressed to indicate APS,
AES, ADF and SORTER are activated; go out when copy conditions are set
manually.
28 AUTO restores the initial machine settings and clears copy selections.
29 KEYPAD is used to enter print quantity and Frame/Fold Erasure values.
30 PRINT QUANTITY WINDOW displays print quantity when selected and
cumulative quantity while copying is in progress.
31 POWER SAVER activates an energy saving mode when the copier will not be
used for an extended period of time.
32 [P] KEY is sued to access all programming functions.
33 [O] RECALL recalls print quantity selected while copying is in progress.
34 STOP/CLEAR stops continuous copying and allows reset of print quantity.
35 START PRINT indicates
wait when light is amber and ready when light is blue-
green; activates copying when pressed while copier is in the ready-to-copy
state.