Selecting offset frequency, Activating tone function – Kenwood TM-V7E User Manual
Page 30
24
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
■
Selecting Offset Frequency
Select how much the transmit frequency will be offset
from the receive frequency.
1 Select the desired band.
2 Press [MNU] to enter Menu mode.
3 Select Menu No. 5 (Repeater).
4 Press [
s
s
s
s
s
]
, then select Item No. 2 (VHF Offset or
UHF Offset).
•
The current offset frequency appears.
6 Press [SET] again to complete the setting.
7 Press [MNU] again to exit Menu mode.
TM-7VE only:
If you have selected "
" for the offset direction, you
cannot change the default (7.6 MHz).
Note:
After changing the offset frequency, the new offset frequency
will also be used by Automatic Repeater Offset.
■
Activating Tone Function
Press [TONE] to activate the Tone function.
•
Each time you press [TONE], the selection changes as
shown below.
No Indicator
Tone
CTCSS
("T")
("CT")
5 Press [SET], then select the appropriate offset
frequency.
•
The selectable range is from 00.00 MHz to 29.95 MHz
in steps of 50 kHz.
VOL SQL
CALL
2
VOL SQL
CALL
1
2
VOL SQL
CALL
CALL
1
2