Storing page codes – Kenwood TM-V7E User Manual
Page 60
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
54
5 Press [
s
s
s
s
s
]
.
•
The first digit blinks.
•
To quit selection, press [OFF].
6 Use the Tuning control or Mic [UP]/[DWN] to select the
first digit.
•
When using the MC-53DM microphone, you can select
three digits by simply pressing numeric keys in sequence.
7 Press [
s
s
s
s
s
]
.
•
The second digit blinks.
8 Repeat steps 6 and 7 to select the second and third
digits.
9 Use steps 4 to 8 to store the desired Station codes or
Group codes in channels 1 to 5.
10 Press [OFF] or Mic [PTT] to complete the setting.
•
You can immediately make a call using the Station code or
Group code that you stored last.
11 To switch Page OFF, press [F]
,
[DTSS]
.
STORING PAGE CODES
Note:
Page does not function while you are storing Page codes even if a
code is received that matches one already stored in memory.
1 Select the desired band.
2 Press [F], [DTSS] twice to switch Page ON.
•
"PAG" appears.
•
If DTSS is already ON, press this key combination once.
3 Press [F] (1 s), [C.SEL].
4 Use the Tuning control or Mic [UP]/[DWN] to select
channel A.
•
To quit selection, press [OFF].
VOL SQL
CALL
CALL
1
2
VOL SQL
CALL
CALL