Kenwood TM-V7E - Manual (Page 98)

92
VHF Band UHF Band
50 W 35 W
Approx. 10 W
Approx. 5 W
Reactance
–60 dB or less
±5 kHz
3% or less
600 Ω
Transmitter
Receiver VHF Band UHF Band
Double conversion
38.85 MHz/ 450 kHz 45.05 MHz/ 455 kHz
0.16 µV or less
0.25 µV or less
12 kHz or more
28 kHz or less
0.1 µV or less
2 W or higher
8 Ω
Circuitry
Intermediate frequency (1st/ 2nd)
Sensitivity
(12 dB SINAD)
Selectivity (–6 dB)
Selectivity (–60 dB)
Squelch sensitivity
Audio output (8 ohms, 5% distortion)
Audio output impedance
Power output
Modulation
Spurious emissions
Maximum frequency deviation
Audio distortion (at 60% modulation)
Microphone impedance
High
Mid
Low
VHF or UHF band
Sub VHF or UHF band
(in VHF/VHF or UHF/UHF mode)
Note: Receiver specifications apply only when using the main VHF or UHF band. They do not apply to the sub VHF or UHF band in VHF/VHF or
UHF/UHF mode.