Kenwood TM-V7E - Manual (Page 50)

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
44
VFO SCAN
VFO Scan allows you to scan all frequencies from the
lowest frequency to the highest frequency on the band.
The current frequency step size is used.
1 Select the desired band.
2 Press [VFO] (1 s).
• The 1 MHz decimal blinks while scanning is in progress.
• Scan starts at the frequency currently displayed.
3 To reverse the scan direction, turn the Tuning control or
press Mic [UP]/[DWN].
• Upward scan:
Turn the Tuning control clockwise or press Mic [UP].
• Downward scan:
Turn the Tuning control counterclockwise or press Mic
[DWN].
4 To quit VFO Scan, press [BAND SEL] for the band
being scanned or [VFO].
• When scanning the TX band, you can also press Mic
[PTT] to quit Scan.
Note: The squelch must be closed for Scan to function.
MEMORY SCAN
Memory Scan allows all memory channels containing data
to be scanned.
1 Select the desired band.
2 Press [MR] (1 s).
• The 1 MHz decimal blinks while scanning is in progress.
• Scan starts with the channel last recalled.
3 To reverse the scan direction, turn the Tuning control or
press microphone [UP]/[DWN].
• Upward scan:
Turn the Tuning control clockwise or press Mic [UP].
• Downward scan:
Turn the Tuning control counterclockwise or press Mic
[DWN].
4 To quit Memory Scan, press [BAND SEL] for the band
being scanned or [MR].
• When scanning the TX band, you can also press Mic
[PTT] to quit Scan.
Note:
◆ At least 2 or more memory channels must contain data and must not
be locked out.
◆ The squelch must be closed for Scan to function.
◆ The L1 to L3 and U1 to U3 memory channels are not scanned.
◆ You can also start Memory Scan when in Channel Display mode.
While Scan is being interrupted, the channel number blinks.