L-3 Communications Navigation Echosounder LAZ 5100 - Manual (Page 36)

Page 4-1
L-3 ELAC Nautik
4 OPERATING INSTRUCTIONS
4.1 SWITCHING THE SYSTEM ON/OFF
CURSOR GAIN RANGE DIM
ESCAPE
ENTER
PRINT MARKER ON OFF
To switch the System ON, press the far right-hand key marked "ON". The system will switch ON
and assume the parameter settings which were selected when the system was last switched OFF.
To switch the system OFF, press and hold the second key from the right, marked "OFF", the
system will switch OFF after about 3 to 5 seconds. This is a built-in safety feature to prevent
accidental switching OFF.
4.2 BRIEF EXPLANATION OF CONTROLS
CURSOR GAIN RANGE DIM
ESCAPE
ENTER
PRINT MARKER ON OFF
• CURSOR : The CURSOR keys allow the user to move the cursor within a MENU and alter
parameters. The position of the cursor can easily be seen, the word, letter or
digit marked by the cursor appears inverse (dark background, light text).
Parameters to be altered must first be "marked" by the cursor.
• ESCAPE : The ESCAPE key is used to leave a MENU or to abort parameter alterations.
• ENTER : The ENTER key is used to call up MENUS and confirm parameter alterations
within MENUS.