L-3 Communications Navigation Echosounder LAZ 5100 - Manual (Page 57)

Page 4-22
L-3 ELAC Nautik
To view stored data
Call up the LOG DATA MENU as described previously. Press the CURSOR W key once to mark
the word "VIEW", followed by the ENTER key. The MENU will disappear from the screen and
stored data will appear. A typical Viewed Data display area can be seen below.
10
20
40
Marker Lines
m
The upper part of the display area contains the following information which is always related to the
1st data block on the extreme right of the display area:
• Time (10:32:40) and date (12-Oct.-94) of stored data
• NAV Mode ON or OFF (if the NAV mode was ON when data was stored, this
window will not be present)
• Latitude and Longitude (only if the system was connected to an external navigation
system)
• The window showing REPLAY indicates that stored data is being viewed
• Depth setting of the shallow water alarm (10m) (if this function was selected)
• Depth, unit (m) and mode (DBK) of measurement
• Depth range (50m)
• the "Page" and "Printing" windows will be explained later