L-3 Communications Navigation Echosounder LAZ 5100 - Manual (Page 56)

Page 4-21
L-3 ELAC Nautik
4.5.3 THE LOG DATA MENU
To call up the LOG DATA MENU, press the ENTER key three times. The MENU as shown below
will appear.
View Display memory contents
Data Transfer >> Transfer data to an external PC
LOG DATA
The LOG DATA MENU is used to gain access to data stored in the system's built-in 24 hour ring
memory. This data can then be viewed on the display area and printed out in full or in part (if an
external printer is connected). The contents of the memory can also be transferred to a personal
computer for further analysis (special software is required in order to transfer and analyse data).
WARNING: During this mode, the echo sounder is not in operation and no actual depth
data will be given. ALARM functions will not be in effect. No data will be
stored.