Rear, Plastic nut 5/16" mounting screws, Troubleshooting & repair – Lincoln Electric POWER WAVE 355/405 SVM159-A User Manual
Page 116
Advertising
PROCEDURE
1. Remove input power to the POWER WAVE
355/405.
2. Using a 5/16” nut driver remove the case wrap-
around cover.
3. Perform the Input Filter Capacitor Discharge
Procedure detailed earlier in this section.
4. Using a 5/16” nut driver remove the four screws
from the bottom and right side of the rear assem-
bly. See Figure F.34.
TROUBLESHOOTING & REPAIR
CURRENT TRANSDUCER REMOVAL AND REPLACEMENT (continued)
F-74
F-74
POWER WAVE 355/405
O F F
O F F
O F F
O F F
O F F
O F F
Plastic
Nut
5/16" Mounting Screws
REAR
FIGURE F.34 – CASE BACK SCREW LOCATIONS
Advertising