Liebert 600T - Manual (Page 11)

Unloading and Handling 5
3.0 U NLOADING AND H ANDLING
The UPS module is shipped in one cabinet to allow easy handling at the site. Because the weight
distribution in the cabinet is uneven, use extreme care during handling and transport. Your
installation may also include Battery Cabinet(s), a Maintenance Bypass Cabinet, and an optional
transformer cabinet.
To reduce the possibility of shipping damage, cabinets are shored with 2x4 bracing, secured with
screw-type nails. This shoring must be carefully removed prior to unloading.
!
WARNING
EXERCISE EXTREME CARE WHEN HANDLING UPS CABINETS
TO AVOID EQUIPMENT DAMAGE OR INJURY TO PERSONNEL.
THE UPS MODULE WEIGHT RANGES FROM 2770 POUNDS TO
7500 POUNDS, NOT INCLUDING THE OPTIONAL
TRANSFORMER CABINET. BATTERY CABINETS WEIGH
BETWEEN 3100 AND 5100 POUNDS.
LOCATE CENTER OF GRAVITY SYMBOLS BEFORE HANDLING
CABINET. TEST LIFT AND BALANCE THE CABINET BEFORE
TRANSPORTING. MAINTAIN MINIMUM TILT FROM VERTICAL
AT ALL TIMES. SLOTS AT THE BASE OF THE UNIT ARE
INTENDED FOR FORKLIFT USE. BASE SLOTS WILL SUPPORT
THE UNIT ONLY IF THE FORKS ARE COMPLETELY BENEATH
THE UNIT.
!
CAUTION
Extreme care is necessary when removing shoring braces. Do not
strike cabinet with hammers or other tools.