Linn AV Loudspeaker - Manual (Page 32)

Fit the spike boss using the M8 cap screw and washer provided.
Then fit the spike and M8 nut and adjust until the spike is secure. Finally
tighten the locking nut until it is hand-tight.
If you have wooden or solid floors you should use the spikes in
conjunction with Linn SKEETS, to provide a firm base and protect the floor
from scratches. These are available from your Linn dealer.
Hiding the cables
For neat installation the cables can be passed under the base and up
through a hole to exit at the relevant sockets.
24
setting up the A
V
5150
These spacer blocks can be removed
to reduce the height of the speaker
when casters are fitted.