Linn AV Loudspeaker - Manual (Page 35)

To enable the remote sense on the second AV 5150 in the daisy chain,
remove the link between the FILTER OUTPUT and POWER AMP INPUT
and add a link between the RIGHT INPUT and POWER AMP OUTPUT, as
shown in the diagram opposite.
Additional wiring to the AV 5150
With some video sources there may be inadequate signal present on the
subwoofer output of the surround processor to switch on the AV 5150.
This manifests itself by the AV 5150 repeatedly switching to standby, for
example during long periods of dialogue. To prevent this happening take
a second feed from the centre channel output of the surround processor
and connect it to the left input of the AV 5150. This will trigger the signal
detection circuitry from either subwoofer signal or centre channel signal.
27
setting up the A
V
5150