LevelOne WCS-2000 - Manual (Page 13)

Figure 10: Save Screen
11. This screen displays all details of the LevelOne IP Network Camera.
Click Save if the settings are correct, or click Back to modify any incorrect values.
12. After clicking Save, you will see the screen below.
You can click the Web UI button to connect to the camera using
your Web Browser.
Using the Web UI is required in order the change the Wireless
settings for the WCS-2000, on the Network screen. The default
Wireless settings for the WCS-2000 are:
Mode: Infrastructure
Channel:11
ESSID: wireless
WEP: Disabled
Figure 11: Final Screen
13. Click Exit to end the Wizard.
Setup is now complete.
10