Upgrade firmware screen – LevelOne WCS-2000 User Manual
Page 34
Upgrade Firmware Screen
This screen is displayed when you click the Upgrade Firmware button on the Status screen.
Figure 29: Upgrade Firmware Screen
This screen allows you upgrade the Firmware (software) in your LevelOne IP Network
Camera. Before using this screen, your must download the upgrade file to your PC.
Then follow this procedure:
1. Click
the
Browse button, and locate the upgrade file.
2. Select this file, and click OK. The filename will then appear in the Upgrade File field.
3. Click
the
Start Upgrade button to transfer the file to the LevelOne IP Network Camera and
start the upgrade procedure.
Note:
•
The upgrade may take several minutes.
•
When the upgrade is completed, the LevelOne IP Network Camera will restart. This will
cause any existing connections to be terminated. Any users viewing or recording the video
will see this as an error.
31