LevelOne WCS-2000 - Manual (Page 39)

Login The camera Administrator can require that users provide a username and
password before being allowed to view the live video.
• If the Administrator has not enabled this option, the Login fields can
be left blank.
• Otherwise, you must enter the username and password allocated to
your by Administrator.
Modifying an Existing Camera
You can change the settings for an existing camera by selecting it in the Camera List on the
main screen, then clicking the Modify Camera button.
You will see a screen like the example below.
Figure 35: Modify Camera
• Data on this screen is the same as for the Add Camera screens.
• You can use the Test button to button to check that a connection and login can be
performed successfully.
36