LevelOne WCS-2000 - Manual (Page 35)

32
5
Chapter 5
Viewing & Recording
This Chapter describes how to view and record the live video stream
generated by the LevelOne IP Network Camera.
Overview
The recommended method to view video is to use the supplied Windows Viewing/Recording
utility.
Installation
1. Insert the supplied CD-ROM into your drive. If the setup program does not start
automatically, run Netcam_Setup.exe in the root folder. You will see the Welcome screen
shown below.
Figure 30: Welcome Screen
2. Click the Client Utility button to start the installation of the Viewing/Recording Utility.
3. Follow the prompts to complete the installation.