LevelOne WCS-2000 - Manual (Page 32)

User Database
User List This lists all users who currently exist.
Use the Add, Delete, and Modify buttons to manage this database.
Alerts
E-Mail Alert Enable the checkbox if you want to send an E-Mail Alert when motion
is detected.
Note:
Motion detection can be triggered by rapid changes in the available
lighting, as well as by moving objects. For this reason, it should only
be used indoors where the available light is fairly constant.
Send to Enter the E-Mail address for the receiver of the E-mail alert.
Show “From” as Enter the E-Mail address to be used as the Sender. This must be a
standard E-mail address, because the SMTP (Simple Mail Transport
Protocol) Server used to send the mail is derived from this address.
Subject Enter the desired text to be shown as the "Subject" for the E-Mail.
Add/Modify User Screen
This screen is displayed when the Add or Modify button on the User screen is clicked. It is used
to enter details of each user.
Figure 27: Add/Modify User Screen
Data - Add/Modify User
User Name Enter the name for the user. Spaces, punctuation, and special
characters must NOT be used in the name.
Also, names are case-insensitive (case is ignored), so you can NOT
use 2 names with the same spelling and different case.
User Password The password for the user above.
Confirm Password Re-enter the password, to ensure it is correct.
29