Chapter 4 web-based management, Introduction, Connecting to levelone ip network camera – LevelOne WCS-2000 User Manual
Page 21: Web-based management, Chapter 4
18
4
Chapter 4
Web-based Management
This Chapter provides Setup details of the LevelOne IP Network Camera’s
Web-based Interface. This Chapter is for Administrators only.
Introduction
The LevelOne IP Network Camera can be configured using your Web Browser. The LevelOne
IP Network Camera must have an IP address which is compatible with your PC.
The recommended method to ensure this is to use the supplied Windows-based Wizard, as
described in the previous chapter.
Connecting to LevelOne IP Network Camera
•
If you have run the Windows-based setup Wizard, the final screen provided a button Web
UI. Clicking this button will immediately connect to the LevelOne IP Network Camera,
using your Web Browser.
•
If using only your Web Browser, use the following procedure to establish a connection
from your PC to the LevelOne IP Network Camera:
•
Once connected, you can add the LevelOne IP Network Camera to your Browser's
Favorites or Bookmarks.
Connecting using your Web Browser
1. Start your WEB browser.
2. In
the
Address box, enter "HTTP://" and the IP Address of the LevelOne IP Network
Camera, as in this example, which uses the LevelOne IP Network Camera's default IP
Address:
HTTP://192.168.0.99
3. If
the
Administrator ID and Password have been assigned, you will then be prompted for a
username and password. Enter the name and password you assigned.