Program bank 3 (p3) – Lexicon PCM 80 User Manual

Page 112

Advertising
background image

Lexicon

4-16

PCM 80 User Guide

4.7

LvlSweeper

ADJUST:

Color

0–24

This preset is driven by level. Any input that exceeds the input threshold will cause a little
burst of resonators that quickly swirl through the stereo field. ADJUST controls the pitch
range of the resonators.

4.8

Sweeper

ADJUST:

Pitch

0–24

This preset is a resonant arpeggiator in which a tempo-driven LFO controls the resonator
pitches. ADJUST controls the pitch range of the arpeggio effect.

4.9

MIDISustain

ADJUST:

Bright

0–5

This preset requires MIDI note input or it will not pass audio. Resonators are assigned as
the notes are played (when playing chords, it's best to spread them a little). Footswitch
2 works like a piano damper pedal. When the audio source is the same as the MIDI source,
the effect is a little like playing a piano while holding down the pedal. When the audio
source is different, well ... ADJUST controls the brightness of the resonators.

0.0

Small+Stage

ADJUST:

Stage Lvl

0–50

This preset combines a smooth, small reverberant space with several stage reflections.
Use ADJUST to set the stage reflection level.

0.1

Small Room

ADJUST:

Liveness

0–60

Use ADJUST to quickly change the ambient characteristics of this typically tight sounding
room. Great for ADR work.

0.2

Living Room

ADJUST:

Decay

0–60

Another ADR preset,medium spaced but with a short Rt. ADJUST quickly changes if not
perfect for your application.

0.3

Brick Kick

ADJUST:

Liveness

0–100

Kicks *ss on kick drums or the entire submix. ADJUST increases the liveness of the
chamber.

0.4

Large Room

ADJUST:

Decay

0–60

A perfectly smooth listening room with medium diffusion. Very natural sounding on any
sound source. ADJUST lengthens or shortens the reverb decay.

0.5

SnareChamber

ADJUST:

Liveness

0–60

Like Brick Kick, ADJUST increases the liveness of the space. A classic from the PCM 70.

0.6

Tiled Room

ADJUST:

Decay

0–60

A future classic... ADJUST controls reverb decay.

0.7

Rich Chamber

ADJUST:

Decay

0–60

Smooth and full sounding. ADJUST varies reverb decay.

0.8

Vox Chamber

ADJUST:

Liveness

0–60

Combines recirculating echoes which fall away quickly once signal is absent. Increasing
ADJUST lengthens the reverb decay, which will mask the reflection echoes. For vocals.

0.9

Locker Room

ADJUST:

Depth

0–127

Just like in high school. ADJUST creates a deeper, more reverberant sound.

1.0

Wide Chamber

ADJUST:

Decay

0–60

Big and wide sounding with a preset short Mid Rt. ADJUST will change that if necessary.
Use on synth pads or vocals.

Resonant Chord Effects

(P2 4.1 – P2 4.9) cont'd.

Program Bank 3 (P3)

Reverb Effects

(P3 0.0 – P3 2.8)

Advertising