Lexicon PCM 80 - Manual (Page 28)

Lexicon
PCM 80 User Guide
2-10
1.5 Mem Protect
The PCM 80 provides a memory protection feature to prevent accidental
overwriting of your stored effects. When this control is set to On, pressing the
front panel Store button will cause an error message to be displayed. To enable
the Store function, turn ADJUST to select Off.
1.6 Auto Load
This control allows you to choose whether PCM 80 effects will be loaded
immediately when selected with SELECT and the Up and Down buttons (On),
or whether they will require a press of the Load/
✱ button (Off).
1.7 Patch Update
When a controller is patched to an effect parameter, this control determines
when the controller will take control of the parameter. If Immediate is selected,
stored parameter values will jump to the current controller position when the
effect is loaded. If Delayed is selected, the stored parameter value will remain
in effect until the controller is moved. See Patching later in this chapter.
1.8 Initialize
Selecting this control arms the PCM 80 to revert to its factory settings.
This will erase all registers and setups,
and return the PCM 80 to its default states.
If you press Store, the display will ask "Are you sure?" (Press STORE). If you
don't want to reinitialize your unit, press any button to cancel the operation. If you
press Store in response to this message, the display will flash "Restoring
original factory settings" and your unit will be reinitialized.