Lexicon PCM 80 - Manual (Page 46)

Lexicon
PCM 80 User Guide
2-28
Creating a Soft Row In Pro mode you still have complete access to the Soft Row, which appears
above row 0 of the full edit matrix. The parameters assigned here are duplicates
of selected parameters in the matrix and can be adjusted from Row S (Soft Row),
or from their matrix location.
The following example shows the edit matrix for the preset, P 0.0 Prime Blue
(Chorus+Rvb algorithm). As you can see, parameters from locations throughout
the matrix have been assigned to this Soft Row. In this preset (and in every
preset) we have designed the Soft Row by assigning the parameters in
numerical order, so that parameters from the Controls row are assigned in order
to the first locations, followed by assignments from the Rvb Time row, and so on.
As Soft Row parameters are also labeled with the name of the row from which
they were taken, this makes it relatively easy to find the source parameter for any
Soft Row assignment.
The Soft Row assigned to an effect appears
above Row 0 in the full Edit matrix.
We have highlighted those
parameters in the Edit matrix
which have been assigned to the
Soft Row of P 0.0 Prime Blue,
for example: FX Width, and
Mod: Sw 1.