Lexicon PCM 80 - Manual (Page 52)

Lexicon
PCM 80 User Guide
2-34
From the Patch row Dst selection display:
• Press Edit to jump to the Edit controls for the parameter you have selected
as the Destination. You will have complete access to all parameter controls,
including any subparameters at that location. Press Edit again to return to
the Patch row.
From the Patch row Values display:
• Press Edit to jump to the next Src or Dst value. Default values are
0...minimum, 127...maximum.
Jump cont'd.
Patching Examples The following examples illustrate how to create a patch, use the patch jump
features, modify the default patch values and add an additional pivot point to
the example patch values.
Load program P0 0.1 EkoChorus. Press Edit to enter Edit mode, then press
Up to move to the Patch Row. Press Load/
✱ until the display looks like this:
Creating a patch with
default values
Int ADJUST
Patch 0 ✱ Src
Turn SELECT to select Patch 1 (which is set to Off).
Int Off
Patch 1 ✱ Src
Turning ADJUST will scroll through the entire list of available patch Sources.
Turn ADJUST counterclockwise until LFO is displayed in the lower right.
Int LFO
Patch 1 ✱ Src
The LFO is now assigned as a patch Source.