Lathem Dukane 24A715 - Manual (Page 40)

[B]=COMMUNICATIONS
This function requires the administrative password. Use this function to set the master
clock’s terminal ID# and baud rate.
See Setting Communications on page 2-8.
[C]=CHANGE PASSWORD
Use this function to change the default user password (000000) to another six-digit num-
ber to prevent unauthorized access to the master clock’s programming functions. Keep a
copy of this password in a safe place.
Enter the current user password, then press [#][9][0][0][0][#]. See the Master Clock User
Guide, document 427-07-00047, for complete instructions.
AUTO BELL TEST
No password is required for this function. Use the AUTO BELL TEST function to turn
on all bell relays once per minute at the start of each minute when you need to test the
continuity of the bell wiring circuits.
See Testing the Bells on page 2-7.
3-6 24A715/24A715M Master Clock Installation Manual