Linear DVS-2400 - Manual (Page 20)

18
HOME MODE
✦ Use this mode when sleeping or when anyone is
staying inside.
✦ Home Mode causes an instant alarm when any
perimeter sensor is triggered.
✦ Home Mode causes a delayed alarm when any exit/
entry sensor is triggered (except in Home Instant
Mode when they are instant).
✦ Alarm siren stops automatically after fi ve minutes
and the system will remain armed.
✦ Home Mode ignores all interior sensors (motion
detectors, etc.).
1A. Arm to Home Mode by entering a user code, and
pressing HOME.
1B. The user can “Quick Arm” to Home Mode from Off
or Chime Mode by pressing HOME for two seconds.
(Quick arming can be disabled; see the “Advanced
Programming” section of this manual.)
✴ When the system is armed to the Home Mode, the
keypad(s) will sound a “Gong” and two “Beeps”.
2. Enter a user code and press OFF or CHIME to disarm
from Home Mode and/or stop the alarm siren.
✴ If an alarm has occurred, multiple Beeps will sound after
disarming and the sensor indicator for the sensor(s) that
caused the alarm will fl ash (switch to Off Mode again or
re-arm the system to stop the fl ashing alarm memory light).
SECURE EXIT
1. If the system is already in the Home Mode and
the user wants to exit the premises while leaving
someone inside with the system still in Home Mode,
enter a user code and press the HOME key.
✴ The HOME light will blink for 60 seconds. No exit delay
Beeps will sound during the Exit Delay.
2A. The user can leave through a door with a delayed
perimeter sensor during the 60 second Exit Delay
without causing the Console to begin an Entry
Delay.
2B. Re-entering during the silent Exit Delay will
extend the Exit Delay another 60 seconds (one
time only).
✎ NOTE: The Exit Delay time can be changed; see the
“Advanced Programming” section of this manual.
HOME INSTANT MODE
1. If the system is already in the Home Mode and the
user wants to make all exit/entry sensors instant,
press HOME for two seconds.
✴ Two “Gongs” and two “Beeps” will sound and the HOME
light will blink continuously.
2. Because all exit/entry sensors will now cause an
instant alarm when in Home Mode, the Console
must be disarmed before opening any exit/entry
delay door.
✎ NOTE: If quick arming is disabled the Home Instant
Mode is unavailable.
MANUAL BYPASSING OF SENSORS
✦ Manual bypassing of sensors in the Home Mode
allows arming of the system at night with open
windows, while still having perimeter protection with
other closed doors and windows.
1. The Console will resist arming with open door or
window sensors.
✴ Four high-low Beeps to warn the user that something is
open and the system will remain in the previous mode.
✴ Lit sensor status indicators show which sensors are open.
2. To manually bypass the open sensors, arm the
system again within fi ve seconds.
✴ A “Gong” and two “Beeps” will sound, the HOME indicator
will light, and the open sensors will be bypassed.
✎ WARNING: Bypassed sensors cannot cause an
alarm. Closing the sensor removes the bypass.
START IN OFF
OR CHIME MODE
YOUR
USER
CODE
DONE
1 GONG
& 2 BEEPS
(OPTIONAL)
HOME MODE
HOME
DONE
1 GONG
& 2 BEEPS
HOLD
DOWN
HOME
START IN OFF
OR CHIME MODE
QUICK ARM
START IN
HOME MODE
YOUR
USER
CODE
DONE
1 GONG
& 2 BEEPS
(OPTIONAL)
HOME
SECURE EXIT
START IN
HOME MODE
DONE
2 GONGS
& 2 BEEPS
HOLD
DOWN
HOME INSTANT
MODE
HOME