Linear DVS-2400 - Manual (Page 8)

6
1 24-HOUR BUTTONS
★ Pressing FIRE for two seconds sounds the fi re siren and sends a “fi re” message
to a central monitoring station through the digital communicator (if the system is
monitored).
★ Pressing EMERGENCY for two seconds sounds the emergency siren and sends
an “emergency” message to a central monitoring station through the digital
communicator (if the system is monitored).
★ Both work even when system is disarmed.
★ IMPORTANT: For personal emergency use only. Not for use as a UL Listed
Medical Alert System.
2 MODE BUTTONS
★ Used to operate the system.
OFF
★ Off Mode disarms the system.
★ Switching to Off Mode stops the alarm siren.
✓ Multiple Beeps sound and sensor status indicators fl ash if an alarm has
occurred.
☞ Multiple Beeps mean caution. AN INTRUDER MAY STILL BE PRESENT.
CHIME
★ Chime Mode disarms the system.
★ Switching to Chime Mode stops the alarm siren.
✓ Multiple Beeps sound and sensor status indicators fl ash if an alarm has
occurred.
☞ Multiple Beeps mean caution. AN INTRUDER MAY STILL BE PRESENT.
★ Chime Mode is for monitoring doors and windows.
✓ Use this mode as an “automatic door chime” when at home.
✓ Opening any protected door or window causes the Console to “ding-dong”.
HOME
★ Home Mode arms the perimeter sensors, but not the interior sensors.
✓ Use this mode when anyone is staying behind.
✓ Interior motion detectors and interior door sensors are not armed.
✓ Home secure mode makes all delayed perimeter sensors instant.
✓ Secure exit mode starts an exit delay while remaining in Home Mode.
✓ Re-entering during the exit delay restarts the exit delay (one time only).
AWAY
★ Away Mode arms the entire system.
✓ Use this mode when leaving home.
✓ Door sensors set for delayed will have a time delay that allows the user to
leave and enter the premises without sounding the alarm.
✓ Re-entering during the exit delay restarts the exit delay (one time only).
✓ Entry Delay Beeps warn the user to disarm the system before the siren
starts.
TEST
★ Test Mode is for testing the system sensors.
✓ All sensor status lights blink when the Test Mode is entered.
✓ Each sensor status light will stop blinking when its sensor is tested.
★ Hold the TEST button down to test all of the Console's indicator lights.
3 MODE INDICATORS
★ Specifi c indicator will light showing the mode the Console is in.
★ HOME indicator will blink during Secure Exit and Home Instant modes.
★ AWAY indicator will blink during the exit delay in the Away Mode.
4 CONSOLE STATUS INDICATORS
★ Shows the current status of the Console.
POWER LIGHT
★ Glows when AC power is on.
★ Blinks when AC power is off and backup battery is installed.
★ Blinks when the backup battery is low, recharging or missing.
★ Off when AC power is off and no backup battery is installed (system disabled).
BATTERIES LIGHT
★ Blinks when one or more sensors have a low battery.
★ Press for one second to view sensor status. Sensor status indicator for any
sensor with a low battery will light along with the BATTERIES indicator. Any
trouble indications will follow during the fi ve second status cycle.
★ Switch to Test Mode after replacing the sensor battery and completely test the
system (see Test Mode). Switching to Test Mode clears the low battery indication.
TROUBLE LIGHT
★ Blinks when one or more sensors have not reported status during the eight hour
status time period.
★ Press for one second to view sensor status. Sensor status indicator for any
sensor that has not reported in will light along with the TROUBLE indicator. Any
low battery indications will follow during the fi ve second status cycle.
★ Switch to Test Mode after servicing the sensor and completely test the system
(see Test Mode). Switching to Test Mode clears the trouble indication.
5 SIREN SPEAKER
★ Makes unique sounds for burglary, fi re and emergencies.
★ Alarm sirens stop automatically after fi ve minutes.
★ Sounds advisory tones to confi rm keystrokes from the Console.
★ Sounds mode selection tones.
★ Sounds alarm memory tones.
★ Beeps when Automation Output is activated.
★ Speaks the system status information when optional VB-2 digital voice synthesis
module is installed.
★ Terminals available for an external siren.
6 STATUS INDICATORS
★ Indicates the status of each of the system’s sensors.
★ Lights show which doors and windows are open.
★ Lights fl ash to display sensors that have caused an alarm.
★ Stick-on labels are provided to identify the custom sensor locations.
7 CASE ACCESS SCREW (HIDDEN)
★ Remove clear display window and sensor identifi cation card to gain access to
the screw.
★ Remove case access screw to unlock case. Case hinges open to the left.
8 KEYPAD
★ Backlit keys for easy viewing in low light conditions.
★ For entering the user's user code (numerically or alphabetically).
★ Used when programming system options.
★ Press to activate the Automation Output.
★ Press to clear keypad if the wrong key is pressed.
★ Press for one second to view sensor battery and supervisory status (see
BATTERIES and TROUBLE indicator description).
4. CONSOLE FEATURES
1
2
3
4
5
6
7
8