LOREX Technology Lorex Digital Video Surveillance Recorder lh1 10 - Manual (Page 129)

115
Appendix J: Recording Audio
Appendix J: Recording Audio
To enable audio recording, Right-click in the main viewing window, and then click Main
Menu> Record. In the Channel drop-down menu, select the channel that you wish to
enable audio recording. In the Audio drop-down menu, select Enable and then click Apply.
Connect RCA audio cables from an audio capable camera(s) to the AUDIO IN ports on the
rear panel of the system. The audio port should correspond to the matching VIDEO IN port
(i.e.
Audio camera 1 should be connected to Video In port 1 and Audio In port 1 ).
Connecting Audio Cameras (4/8 channel )
Connecting Audio Cameras (16 channel)
8 channel model shown
Audio-enabled camera
(not included)
Audio IN channels 1~4 Audio IN channels 5~16
Audio harness:
Connect the audio harness
into the AUDIO IN
(CH5-CH16) port. The ends
of the audio harness
requires a BNC to RCA
adapter to connect RCA
audio cameras.
Connect a BNC to RCA connector
(not included) to connect RCA
devices to BNC ports.