LOREX Technology Lorex Digital Video Surveillance Recorder lh1 10 - Manual (Page 56)

42
Using the Main Menu
Device
The Device menu allows you
to configure hard drive,
alarm, PTZ, Mobile and
................ Motion settings.
The Device menu contain the following
sub-menus:
• HDD
• Alarm
• PTZ
• Mobile
• Motion
Configuring Hard Drive settings
To format the hard drive:
1 From the Device menu, click HDD.
2 Click the checkbox under Select to choose
the drive you wish to reformat.
3 Click Format HDD.
4 When the warning window appears, click
OK. Wait for the system to format the hard
drive.
To set the hard drive recording mode
(loop or linear):
1 Click HDD.
2 Click the checkbox under Select to choose
the drive you wish to configure.
3 In the Overwrite drop-menu, select AUTO
for the system to continually loop the
recording (recommended).
• If desired, select the duration you want the
hard drive to store the content for "linear"
recording. Select from 1hr ~ 90 days.
4 Click Apply to save your settings.
To format a USB memory stick:
1 Insert a USB memory stick into the rear
panel of the system.
2 Click HDD.
3 Under the Select checkbox, select the USB
memory drive.
4 Click Format USB.
Right-click>Main Menu>Device
To open the Device menu:
HDD