LOREX Technology Lorex Digital Video Surveillance Recorder lh1 10 - Manual (Page 151)

137
Configuring the system remotely
4 In the "Day to Day" and "Too" drop-down menu, select the day and channel you wish to apply
the settings to. Select the channel(s) you wish to apply the settings to. Use the Copy button to
copy the settings to multiple channels.
5 Click Save to apply your settings.
Alarm menu
To configure the Alarm menu:
1 Click REMOTE CONFIG>Alarm.
2 Configure the following settings you want Alarm recording to record with:
• Buzzer Time: Select the duration of the buzzer time. Choose from Off, 10s, 20s, 40s, 60s.
• MD Alarm (Motion Detection Alarm): Select the checkbox to enable motion detection alarm
recording.
• Select the "Email" checkbox if you want the system to send email notifications when
motion is detected (configuration required).
• Select the "Full Screen" checkbox if you want the channel that detects motion, to open in
full screen view.
Select the channel(s) you
wish to apply the settings to.
Alarm