LOREX Technology Lorex Digital Video Surveillance Recorder lh1 10 - Manual (Page 27)

13
Remote Control (4 & 8 Channel)
Remote Control (4 & 8 Channel)
The remote control is the secondary input
device for navigating the system’s interface.
To use the remote control:
1 Number Keys (1 -9) : Selects the desired
channel in full screen mode
•
0 : Press 0 three times to switch between VGA
output and BNC Video Out output.
• : Changes view of system channel (i.e.
Channels 1-4, 5-8, split-screen etc.)
• MENU : Opens the Main Menu. Within menus,
the MENU button is used to exit the menu.
2 Navigation Cursors : Use the navigation
cursors to navigate the menu.
•
: Confirms the selection in the menu.
• Press to access System Information
during live view.
3 SUB MENU : Opens the system sub menu.
4 MUTE : Mutes audio channel during live view
and playback.
5 Playback Controls :
• : During playback, press repeatedly to
increase playback speed
• : During playback, press repeatedly to
increase reverse playback speed
• :
• In live view, press to open the Record
Search Menu
• During playback, press to play video.
• :
• In live view, press to start sequence
view. During playback, press to pause
video
• : Record: Press to resume recording
• : Press to stop recording.
1
2
3 4
5
*Audio capable cameras (not included) are required for audio
recording and listen-in audio functionality.
TIP: When using the remote
control to enter password and
camera titles, select the field
using the navigation buttons,
press
, and then press the
number buttons.
.
.